UAE-KSA–BAHRAIN - 00971 55 9454212, OMAN–EGYPT-KUWAIT - ,QATAR-JORDAN–YAMAN - 00971 56 3462999, info@techcorgulf.com

HELICOIL Thread inserts for metals

Product Code : HTM

Price :€ 0.00

Product Description

FOR HIGH-STRENGTH FASTENINGS

HELICOIL® thread inserts create high-strength fastenings in metal low-strength materials and have been well established on the market for more than 60 years.

Characteristics:-

Function

HELICOIL® plus thread inserts

HELICOIL® plus thread inserts create high-strength, wear-resistant, heat-resistant threads of highest precision. They are available in free running and screwlock version. The green or red colour allows easier identification when they are installed.

Benefits

  • Corrosion and heat-resistant
  • Wear-free
  • Rejects recovery
  • Uniform load and stress distribution
  • Easy identification even when installed (thanks to colouring)
  • Available in different variants for the most different requirements
  • Assembly systems, tools, and products available from one source

HELICOIL® thread inserts are available with imperial or metric dimensions and as special designs.

Technology:-

The newest generation of this technology is HELICOIL® plus. Easy handling
allows easier installation. Thanks to the reduced diameter in the first thread, the thread insert can be screwed in like a screw.

HELICOIL® plus inserts are highly wear-, corrosion-, and heat-resistant and show low thread friction within small tolerances.

Böllhoff is certified

HELICOIL® plus thread inserts comply with many common industry requirements and standards.Certificates & standards

Product types:-

HELICOIL® plus HELICOIL® tangfree HELICOIL® plus TWINSERT Free running version     Screwlockversion
HELICOIL® plus

HELICOIL® plus

HELICOIL® plus free running and HELICOIL® plus screwlock threaded inserts

The thread insert with precision formed, rhombic profile is available as free running or screwlock version.

Our seal of quality, a rhombic imprint at the end of the last thread, unmistakably identifies each Böllhoff HELICOIL® plus thread insert as an original.

 

HELICOIL® tangfree

HELICOIL® tangfree threaded insert

No tang break and no tang removal. No tang is required for the installation of HELICOIL® tangfree coil thread. Therefore the coil thread can installed on both sides without loss of quality. 
HELICOIL® tangfree: The up-to-date HELICOIL® coil thread insert technology.

HELICOIL® tangfree is compatible to the HELICOIL® plus system

This means:

  • Identical HELICOIL® plus holding threads
  • No design modification
  • No other taps necessary


tangfree® is a registered trademark of the Böllhoff Company

HELICOIL® plus TWINSERT

HELICOIL® plus TWINSERT

HELICOIL® TWINSERT

Is the tapped hole widely torn?
Has the thread been cut too large?

For these cases the HELICOIL® plus TWINSERT is the ideal repair element.

HELICOIL® plus TWINSERT consists of two HELICOIL® plus thread inserts. The external element is a HELICOIL® plus free running. For the internal insert you can choose between HELICOIL® plus free running and HELICOIL® plus screwlock.

Free running version

Free running version

HELICOIL® free running

Every winding of the thread insert with precision formed, rhombic profile is free running. The result is an internal thread true to gauge that can be used on both sided.

Thanks to its green colour, the HELICOIL® plus free running is easier to identify after its installation.

It is conforming to DIN 8140-a.

Screwlock version

Screwlock version

HELICOIL® screwlock

The HELICOIL® plus screwlock has the same benefits regarding the threads as the HELICOIL® plus free running and it is confirming to DIN 8140-b.

Additionally an integrated screw clamping area serves as a screw-lock.

The screw clamping is realised by one or more polygone formed windings that clamp the flanks of the screwed-in screws. The result is an elastic frictional resistance.

The HELICOIL® plus screwlock can be recognised thanks to its red colour.
The HELICOIL® screwlock inserts can only be used with screws of property class 8.8 or higher.

 

Applications:-

Automotive & aerospace

Car gear box cover made of aluminium die-cast, 
HELICOIL® plus, M 14 x 1,5 x 14, free running

For use in gear boxes, exhaust systems, engines and satellites, for thread reinforcement, repeated screwing, maintenance and repair HELICOIL® application

Electronics, sheet metal, plastic

Carrier plate for electronic components made of aluminium pressure die-casting

For use in lamps, electrical appliances, drill hammers, etc. HELICOIL® application

Machines and plants

Machine construction console ,
Material G-AISi9 Mg, 
HELICOIL® plus, M 8 x 12,
free running

For use in printing presses, in high temperature range, for repeated screwings, maintenance and repair HELICOIL® application

 

Manual installation

Manual taps
Manual taps are available in various dimensions.


Type 0140.0   Type 0140.1-2     Type 0140.3-5

                                          

 

Manual installation tools

 

  • Type H-PSG

    • Threaded mandrel
    • Pitch guided
    • With bit gauge
  • Type H-PMG

    • Flat mandrel
    • Pitch guided
    • With bit gauge
  • Type H-PM

    • Flat mandrel
    • Without pitch guiding
    • With bit gauge
  • Type H-M

    Fly-over tool for HELICOIL® and HELICOIL® plus with bit gauge

Additional tools

 

  • HELICOIL® plus tang break-off tool

  • HELICOIL® plus semi-automatic tang break-of tool type TB-M with spring-loaded tension

Manual extracting tools

Manual extracting tools are available in all thread diameters.


Mechanical assembly

Machine taps

HELICOIL® machine taps are available in various dimensions.



Type 0141.1

Type 0141.4

Type 0141.5

Mandrel tools

HELICOIL® plus installation mandrels for electric, battery and pneumatic installation tools

  • Type 4160.23 (structural shape 1)

  • Type 4160.25 (structural shape 2)

HELICOIL® tangfree installation tool

  • HELICOIL tangfree installation tool – Type 5160.45

    Type 5160.45



Caution

These installation mandrels can also be used as manual installation mandrels.

Screwlock installation mandrels are marked with a ring-shaped puncture at the leading shank.
Free running installation mandrels are provided with a smooth guiding shank.

Electro / accumulator installation

 

  • HELICOIL® plus battery power pack installation tool type B-S 206

    Type B-S 206

    Battery installation tool (bendable)

    For HELICOIL® plus M 2 - M 6,
    to use with HELICOIL® plus installation mandrel.

    Incl. 2 accumulator packs, fast battery charger and carrying case.

  • Type B-S 824

    Battery installation tool

    For HELICOIL® plus M 7 - M 24,
    to use with HELICOIL® plus installation mandrel.

    Incl. 2 accumulator packs, fast battery charger and carrying case.

  • Type E-S 206

    Electric installation tool

    For HELICOIL® plus M 2 - M 6,
    to use with HELICOIL® plus installation mandrel.

    Incl. power supply unit for two screw drivers and carrying case.

  • HELICOIL® Electrical installation tool – Type ES-410

    Type E-S 410

    Electric installation tool

    For HELICOIL® plus M 4 - M 10,
    to use with HELICOIL® plus installation mandrel.

    Incl. revolution adjustment by means of high running ramp control and carrying case.

Pneumatic installation tools

HELICOIL® plus pneumatic installation tools

 

  • Type P-S 412

    Pneumatic installation tool

    For HELICOIL® plus M 4 - M 12,
    to use with HELICOIL® plus installation mandrel.

  • Type P-S 1216

    Pneumatic installation tool

    For HELICOIL® plus M 12 - M 16,
    to use with HELICOIL® plus installation mandrel.

Fittings

For a reliable control of the installation torque as well as for the horizontal suspension of the tools at the balancer system, an additional handgrip for the P-S 1216 and a suspension clip for the P-S 412 and P-S 1216 are available.

Pre-winder cartridge tools

HELICOIL® plus pre-winder cartridge tools

 

  • Type P-PSG

    Pre-winder cartridge tools
    for HELICOIL® plus free running and screwlock.

    The installation mandrel with guiding thread driven by a reversible compressed-air motor
    runs through a guiding nut. Setting of the required installation depth is carried out with compensation washers between coupling and leader cartridge.
    From M 16 only useable up to 2.0 d.

  • Type P-PSG

    Pre-winder cartridge tool
    for HELICOIL® plus stripfeed

    Magazines HELICOIL® plus thread inserts have benefits especially for processing smaller thread inserts.

    Efficient installation of HELICOIL® plus for medium to large series.

Additional tools

Parallel system type S

  • For HELICOIL® and HELICOIL® plus setting tools
  • Rationalisation
  • Quick and safe postioning
  • Fatigue-free working
  • No return rotation forces
  • Absorption of screwdriver weight
  • Easy handling
  • Flexible (pivotable 360°)

Incl. 3-axis guiding system, tool fitting, 1 balancer (1 up to 3 kg), base plate made of extruded alumium profile with grooves


Dimensions:
240 x 40 x 500 mm

 

  • HELICOIL® plus pneumatic tang break-off tool

    • Type TB-P
    • With push start

Download Catalogues   More Link